• Welcome
  • About
  • Teachers
    • Getting Started
      • Athena
        • Athena .STL Part Files
      • da Vinci 1.0
        • Unboxing the da Vinci
        • Loading da Vinci Filament
        • Setup for Printing Your First Model
        • Print Bed Maintenance
        • Drive Belt Tension
        • Display Panel Trouble Shooting & Repair
        • Unclogging the Nozzle
        • da Vinci Calibration Fail Troubleshooting
        • da Vinci Advanced Settings: Layer Height
        • da Vinci Advanced Settings: Speed
        • da Vinci Advanced Settings: Support
        • da Vinci Advanced Settings: Shells
        • da Vinci Advanced Settings: Raft
        • Filament Replacement Instructions
      • MakerBot 2X
        • MakerBot Replicator 2X User Manual
        • Unboxing the MakerBot Replicator 2X
        • Start Up Process
        • MakerBot MakerWare
        • Loading the Filament
        • Leveling the Build Plate
        • Printing an Object
        • Import 3D Models into MakerWare and Prepare for Printing
        • Watch the First Layer
        • Maintenance for the MakerBot Replicator 2X
        • Unclogging the Extruder
        • Unloading the Filament
      • MakerBot Mini
        • MakerBot Mini User Manual
        • Unboxing the MakerBot Mini
        • MakerBot Mini Setup
        • MakerBot MakerWare
        • Import 3D Models into MakerWare and Prepare for Printing
        • Watch the First Layer
        • Unclogging the Extruder
      • SeeMeCNC Eris
        • Eris: Unboxing & Setup
      • Ultimaker 2
        • Ultimaker 2 User Manual
        • Ultimaker 2 3D Printer Setup
        • Leveling the Build Plate
        • Changing Filament
        • Updating Firmware
        • Unblocking the Nozzle – The Atomic Method
        • Workflow
        • Panel Replacement
    • Software
      • Beginner
        • 3D Tin
        • Sketchup
          • Printing from SketchUp
        • Tinkercad
        • Tinkerplay
      • Intermediate
        • 123D Design
        • Blender
      • Advanced
        • Inventor
        • Solid Edge
        • SOLIDWORKS
    • Tips & Tricks
      • ABS vs. PLA
      • Finishing Acetone Wash Trick
      • Gluing: Making Your 3D-printed Objects Stick
      • Painting Your Prints
      • Printing from SketchUp
      • Use Acetone to Clean Build Plate
    • Resources
      • Additional Equipment
      • Additional Sites
      • Frequently Asked Questions
      • Lesson Plans
      • Museum/Institutional Resources
      • Print The Legend Documentary
      • Safety First
      • TCAPS Spark, a Mobile Makerspace
    • Professional Development
    • Help Me!
      • Contact Fellow Educators
  • Schools’ Prints
    • Grand Traverse Academy
    • The Pathfinder School
    • TBAISD
      • Career-Tech Center
      • Manufacturing Technology Academy
    • TCAPS
      • Cherry Knoll Elementary
      • Eastern Elementary
      • Silver Lake Elementary
      • Westwoods Elementary
      • West Middle School
      • Central High School
      • West Senior High School
  • Real World 3D Printing
  • News
    • 3D Printing Project News
    • World News
Skip to content

3D Printer Project

  • Welcome
  • About
  • Teachers
    • Getting Started
      • Athena
        • Athena .STL Part Files
      • da Vinci 1.0
        • Unboxing the da Vinci
        • Loading da Vinci Filament
        • Setup for Printing Your First Model
        • Print Bed Maintenance
        • Drive Belt Tension
        • Display Panel Trouble Shooting & Repair
        • Unclogging the Nozzle
        • da Vinci Calibration Fail Troubleshooting
        • da Vinci Advanced Settings: Layer Height
        • da Vinci Advanced Settings: Speed
        • da Vinci Advanced Settings: Support
        • da Vinci Advanced Settings: Shells
        • da Vinci Advanced Settings: Raft
        • Filament Replacement Instructions
      • MakerBot 2X
        • MakerBot Replicator 2X User Manual
        • Unboxing the MakerBot Replicator 2X
        • Start Up Process
        • MakerBot MakerWare
        • Loading the Filament
        • Leveling the Build Plate
        • Printing an Object
        • Import 3D Models into MakerWare and Prepare for Printing
        • Watch the First Layer
        • Maintenance for the MakerBot Replicator 2X
        • Unclogging the Extruder
        • Unloading the Filament
      • MakerBot Mini
        • MakerBot Mini User Manual
        • Unboxing the MakerBot Mini
        • MakerBot Mini Setup
        • MakerBot MakerWare
        • Import 3D Models into MakerWare and Prepare for Printing
        • Watch the First Layer
        • Unclogging the Extruder
      • SeeMeCNC Eris
        • Eris: Unboxing & Setup
      • Ultimaker 2
        • Ultimaker 2 User Manual
        • Ultimaker 2 3D Printer Setup
        • Leveling the Build Plate
        • Changing Filament
        • Updating Firmware
        • Unblocking the Nozzle – The Atomic Method
        • Workflow
        • Panel Replacement
    • Software
      • Beginner
        • 3D Tin
        • Sketchup
          • Printing from SketchUp
        • Tinkercad
        • Tinkerplay
      • Intermediate
        • 123D Design
        • Blender
      • Advanced
        • Inventor
        • Solid Edge
        • SOLIDWORKS
    • Tips & Tricks
      • ABS vs. PLA
      • Finishing Acetone Wash Trick
      • Gluing: Making Your 3D-printed Objects Stick
      • Painting Your Prints
      • Printing from SketchUp
      • Use Acetone to Clean Build Plate
    • Resources
      • Additional Equipment
      • Additional Sites
      • Frequently Asked Questions
      • Lesson Plans
      • Museum/Institutional Resources
      • Print The Legend Documentary
      • Safety First
      • TCAPS Spark, a Mobile Makerspace
    • Professional Development
    • Help Me!
      • Contact Fellow Educators
  • Schools’ Prints
    • Grand Traverse Academy
    • The Pathfinder School
    • TBAISD
      • Career-Tech Center
      • Manufacturing Technology Academy
    • TCAPS
      • Cherry Knoll Elementary
      • Eastern Elementary
      • Silver Lake Elementary
      • Westwoods Elementary
      • West Middle School
      • Central High School
      • West Senior High School
  • Real World 3D Printing
  • News
    • 3D Printing Project News
    • World News

3D Printer Project

"Design something that your imagination leads you to." ~ Ethan, Eastern Elementary Student

  • Welcome
  • About
  • Teachers
    • Getting Started
      • Athena
        • Athena .STL Part Files
      • da Vinci 1.0
        • Unboxing the da Vinci
        • Loading da Vinci Filament
        • Setup for Printing Your First Model
        • Print Bed Maintenance
        • Drive Belt Tension
        • Display Panel Trouble Shooting & Repair
        • Unclogging the Nozzle
        • da Vinci Calibration Fail Troubleshooting
        • da Vinci Advanced Settings: Layer Height
        • da Vinci Advanced Settings: Speed
        • da Vinci Advanced Settings: Support
        • da Vinci Advanced Settings: Shells
        • da Vinci Advanced Settings: Raft
        • Filament Replacement Instructions
      • MakerBot 2X
        • MakerBot Replicator 2X User Manual
        • Unboxing the MakerBot Replicator 2X
        • Start Up Process
        • MakerBot MakerWare
        • Loading the Filament
        • Leveling the Build Plate
        • Printing an Object
        • Import 3D Models into MakerWare and Prepare for Printing
        • Watch the First Layer
        • Maintenance for the MakerBot Replicator 2X
        • Unclogging the Extruder
        • Unloading the Filament
      • MakerBot Mini
        • MakerBot Mini User Manual
        • Unboxing the MakerBot Mini
        • MakerBot Mini Setup
        • MakerBot MakerWare
        • Import 3D Models into MakerWare and Prepare for Printing
        • Watch the First Layer
        • Unclogging the Extruder
      • SeeMeCNC Eris
        • Eris: Unboxing & Setup
      • Ultimaker 2
        • Ultimaker 2 User Manual
        • Ultimaker 2 3D Printer Setup
        • Leveling the Build Plate
        • Changing Filament
        • Updating Firmware
        • Unblocking the Nozzle – The Atomic Method
        • Workflow
        • Panel Replacement
    • Software
      • Beginner
        • 3D Tin
        • Sketchup
          • Printing from SketchUp
        • Tinkercad
        • Tinkerplay
      • Intermediate
        • 123D Design
        • Blender
      • Advanced
        • Inventor
        • Solid Edge
        • SOLIDWORKS
    • Tips & Tricks
      • ABS vs. PLA
      • Finishing Acetone Wash Trick
      • Gluing: Making Your 3D-printed Objects Stick
      • Painting Your Prints
      • Printing from SketchUp
      • Use Acetone to Clean Build Plate
    • Resources
      • Additional Equipment
      • Additional Sites
      • Frequently Asked Questions
      • Lesson Plans
      • Museum/Institutional Resources
      • Print The Legend Documentary
      • Safety First
      • TCAPS Spark, a Mobile Makerspace
    • Professional Development
    • Help Me!
      • Contact Fellow Educators
  • Schools’ Prints
    • Grand Traverse Academy
    • The Pathfinder School
    • TBAISD
      • Career-Tech Center
      • Manufacturing Technology Academy
    • TCAPS
      • Cherry Knoll Elementary
      • Eastern Elementary
      • Silver Lake Elementary
      • Westwoods Elementary
      • West Middle School
      • Central High School
      • West Senior High School
  • Real World 3D Printing
  • News
    • 3D Printing Project News
    • World News

Category: World News/Events

3D Printing Our Future in Space and on Earth | Tommaso Ghidini
Jan 28
Drea Weiner

3D Printing Our Future in Space and on Earth | Tommaso Ghidini

Read More
Lisa Harouni: A primer on 3D printing
Jan 22
Drea Weiner

Lisa Harouni: A primer on 3D printing

Read More
The Next Dimension of CES 2016 – 3D Printing
Jan 14
Drea Weiner

The Next Dimension of CES 2016 – 3D Printing

Read More
Engineering Newswire 161: 3D Printer Builds Home in 24 Hours
Oct 26
Drea Weiner

Engineering Newswire 161: 3D Printer Builds Home in 24 Hours

Read More
World Maker Faire NYC 2015 - Ultimaker: 3D Printing Event Recap
Oct 7
Drea Weiner

World Maker Faire NYC 2015 – Ultimaker: 3D Printing Event Recap

Read More
The TCT 3D Printing Show 2015
Oct 6
Drea Weiner

The TCT 3D Printing Show 2015

 

Read More
Breakthrough Glass 3D Printing Platform Unveiled by Neri Oxman & MIT
Sep 2
Drea Weiner

Breakthrough Glass 3D Printing Platform Unveiled by Neri Oxman & MIT

Glass is now a medium available for 3D printing. The technology uses a two part chamber heating process where the first chamber heats the glass and the second chamber extrudes the glass onto the build plate. This process requires a temperature up to 1640°C. What might this technology be used for besides beautiful light fixtures?…

Read More
AZ Company Reveals 3D-Printed Road-Ready Car
Jul 30
Drea Weiner

AZ Company Reveals 3D-Printed Road-Ready Car

Here is the next phase is 3D printed cars.

Read More
3D Printshow London 2015
Jul 5
Drea Weiner

3D Printshow London 2015

Read More
3D Printshow London 2014
Jul 3
Drea Weiner

3D Printshow London 2014

Read More

Newsletter Registration:

Click Here

Check us out on

Facebook

Categories

  • Architecture
  • Art
  • Community Projects
  • Education
  • Engineering
  • Entertainment
  • Entrepreneur
  • Fashion
  • Food
  • Foreign Language
  • History
  • Hobby
  • Housing
  • Medical
  • Music
  • Pets
  • Research
  • Science
  • Technology
  • Tools
  • Traverse City
  • Uncategorized
  • World News/Events

Contact:

Drea Weiner, MiSTEM Network Director
Office: (231) 922-6560
Email: 3dprinterplc@gmail.com

Designed By InkHive. © 2023 3D Printer Project. All Rights Reserved.
Cleantalk Pixel